CYU208 Customized Full Set Dental Synthetic Resin Teeth

ELIJAH Dental Orthodontic Adhesive Bondable Glue For Bracket Brace Buccal Tube Material Dentistry Consumables Material

Instruction for use:
1. Prepare and clean the tooth, isolate and dry the tooth thoroughly.

2. Apply etchant to the prepared enamel for 30-40 seconds, lightly agitating the etchant during its application can enhance its action.

3. Rinse teeth thoroughly with water to remove all traces of the
etchant. Re-isolate and dry with air The surface should appear dull and frosty white. If not, repeat step ( It's important that the tooth be completely dry before proceeding.

4. Dispense equal amounts one or two drops of primer to each surface of the prepared teeth to be bonded.
Note:When using self cure bonding systems,bracket bases should closely confirm to the tooth surface to be bonded. Adiust bracket base as needed.

5. Brush a thin coat of primer on the bracket base. Do not contaminate primed surface of bracket base. Primed surfaces should not be exposed to air for more than 10 minutes.

6. Apply equal amount of paste to the bracket base and place bracket on tooth with a slight rotating motion immediately. Immediately position the bracket to desired angulation and press firmly to insure paste is in a thin uniform layer. All adjustments to brackets must be made within 20 seconds or prior to gelation of paste. Remove extra adhesives. Keep teeth isolated for appropriately 3 minutes. Archwires may be placed 7 minutes after placement.

Note:
To re-bond a lost bracket, all adhesives must be removed from the tooth,and then follow steps.